76 Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Chapter 2 Install the Dynamix 1444 Series Monitoring System
Wiring Expansion Modules
An expansion module has four removable 6-way terminal connectors, two
interfacing directly to the removable module and two to the terminal base. The
base and module-mounted headers are able to accept either a screw or spring
terminal connector.
IMPORTANT BNC outputs apply only to the TSC Expansion module type.
PWR LNS MS CH0 CH1 OP0 OP1
1444-TSCX02-02RB
Tachometer Signal Conditioner
BNC buffered
outputs (two)
Upper base connecto
Upper module
connector
Lower base connector
Lower module
connector
To Next Page
Loading...