192 Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Chapter 4 Measurement Definition
The Demand page defines the acquisition of time waveform data for demand,
or advanced, condition monitoring data requests. Available services enable data
requests “on demand” from the demand (advanced) data buffers with each
request uniquely definable per the requester specifications, which can include
various post-processing tasks, including FFT processing.
This page is presented when the channel is configured for Dynamic
measurements.
Demand data lets you define a deep data buffer at any one of the enabled data
sources (See Filters
on page 124). Once defined the demand Buffer updates
continuously in the background while imparting minimal additional loading to
the module processors.
To Next Page
Loading...