Rockwell Automation Publication 1444-UM001D-EN-P - June 2018 21
Chapter 2
Install the Dynamix 1444 Series
Monitoring System
Topic Page
Design Considerations 27
Installation Overview 41
Mount the Terminal Base Unit 43
Establish Bus Connections 44
Configure the Terminal Bases 45
Install the Module 45
Wiring Overview 49
Wiring the Main Module 50
DYN Module Transducers 66
EtherNet/IP Connector 75
4…20 mA Expansion Module 79
Wiring Expansion Modules 76
Tacho Signal Conditioning Expansion Module 81
Start the Module and Perform a Self-test 88