Rockwell Automation Publication 1444-UM001D-EN-P - June 2018 497
CIP Objects Appendix A
NV status relates to nonvolatile storage in the auxiliary module, not the main
module.
34 Get V Relay 2 Auto Relay
Control
BYTE Configuration of relay behavior in case
of detected fault condition, which is
based on associated voted alarm.
Relay control
35 Get V Relay 3 Auto Relay
Control
BYTE Configuration of relay behavior in case
of detected fault condition, which is
based on associated voted alarm.
Relay control
Relay Configuration Group of 4 configuration attributes.
36 Get V Relay 0 User Relay
Control
BYTE User configuration Relay Control of
relay behavior in case of detected
fault condition.
Relay control
37 Get V Relay 1 User Relay
Control
BYTE User configuration Relay Control of
relay behavior in case of detected
fault condition.
Relay control
38 Get V Relay 2 User Relay
Control
BYTE User configuration Relay Control of
relay behavior in case of detected
fault condition.
Relay control
39 Get V Relay 3 User Relay
Control
BYTE User configuration Relay Control of
relay behavior in case of detected
fault condition.
Relay control
40 Get V Relay 0 Relay Control BYTE Actual behavior of relay in case of
detected fault condition.
Relay control
41 Get V Relay 1 Relay Control BYTE Actual behavior of relay in case of
detected fault condition.
Relay control
42 Get V Relay 2 Relay Control BYTE Actual behavior of relay in case of
detected fault condition.
Relay control
43 Get V Relay 3 Relay Control BYTE Actual behavior of relay in case of
detected fault condition.
Relay control
Table 247 - Instance Attributes (continued)
To Next Page
Loading...