Allen-Bradley 1734-IE2V User Manual

Rockwell Automation Publication 1734-UM001E-EN-P - July 2013
Configure POINT I/O Modules in RSLogix 5000 Software 203
If calibration fails, the Results dialog shows a failed calibration.
9. If calibration is successful, click Finish; otherwise, from the Results dialog,
click Retry to calibrate the channel that did not calibrate successfully and
repeat the process until calibration is successful.
10. Repeat calibration for each channel, if applicable.

Allen-Bradley 1734-IE2V Specifications

General

Brand	Allen-Bradley
Model	1734-IE2V
Category	I/O Systems
Language	English