Allen-Bradley 1734-IE2V User Manual

Rockwell Automation Publication 1734-UM001E-EN-P - July 2013
Configure POINT I/O Modules for DeviceNet Networks 215
See the figure for a dialog for selecting autobaud.
5. From the Device Parameters dialog, click Download to Device.
To configure the 1734-OW2 relay output module, use this procedure.
1. From the General dialog, click Device Parameters to get the dialog for
setting parameters.
You see the EDS Editor.
2. From the EDS Editor, click Upload to load the latest information.

Allen-Bradley 1734-IE2V Specifications

General

Brand	Allen-Bradley
Model	1734-IE2V
Category	I/O Systems
Language	English