Publication 1734-UM006B-EN-P - August 2005
A-8 Configure Modules in RSLogix 5000 Software
When the value for Scalar is one of the following, frequency
precision <
1.
• 16
• 32
• 64
• 128
8. Perform one of the following.
• Click another tab at the top of the dialog.
or
• Click OK, which closes the dialog.
or
• Click Cancel to return to default values.
or
• Click Apply to save changes you made on any of the dialogs
and continue to display the dialog, noting that you enable the
Apply button when you make changes to any of the dialogs.
To Next Page
Loading...
