1 Publication 1734-UM006B-EN-P - August 2005
Preface
Purpose of This Manual
Read this manual for information about how to install, configure and
troubleshoot your Encoder/Counter module.
Who Should Use This
Manual
You must be able to use RSNetworx software or similar configuration
software to set up and calibrate these modules. You must have the
capability to download and use Electronic Data Sheet files.
We assume you know how to do this in this manual. If you do not,
refer to your software user manuals or online help before attempting
to use these modules.
For This Information: See:
About the Modules Chapter 1
Install the Modules Chapter 2
Encoder/Counter Module Input and Output Data Chapter 3
Configure Your Encoder/Counter Module Chapter 4
Access Instantiated Instances Chapter 5
Troubleshoot with the Indicators Chapter 6
AB Drives
To Next Page
Loading...
Need help?
General
