Configure a ControlNet Module
52 Rockwell Automation Publication CNET-UM001F-EN-P - February 2018
14. On the Save Configuration dialog box, select Optimize and rewrite
the schedule for all connections.
15. Click OK.
16. Return to your Logix Designer software project.
a. Save your project to update the network file in your Logix
Designer project.
b. Download your project as described in
Download the Project
to the Logix 5000 Controller on page 36 on page 38.
Prior to scheduling a network online, make sure that all keepers are
unconfigured or do not conflict with the current network. If your network has
already been scheduled and you made a change to it, you must reschedule it.
Refer to
Reschedule a ControlNet Network that has Previously been
Scheduled on page 56 on page 53 on page 56 for more information.
To schedule a network online, follow this procedure in RSNetWorx for
ControlNet software.
1. From the File menu, choose New.
2. From the New File dialog box, select a ControlNet configuration for
the new file and click OK.
Online
To Next Page
Loading...
Need help?
General
