Publication 1794-6.5.8 - January 2010
Writing Configuration to and Reading Status from Your Module with a Remote I/O Adapter 75
Word 2 Bits 00–15
(00–17)
Output Channel 1 data. Refer to Table 4.19.
Word 3 Input Channels 0 and 1 Filter Selections (refer to Table 4.16)
Bits 00–01 Channel 0 Filter Setting
Bits 04–07 Channel 1 Filter Setting
Word 4 Channel configuration
Bits 00–03 Input Channel 0 Configuration – Refer to Table 4.15.
Bits 04–07 Input Channel 1 Configuration – Refer to Table 4.15.
Bits 08–11
(10–13)
Output Channel 0 Configuration – Refer to Table 4.19.
Bits 12–15
(14–17)
Output Channel 1 Configuration – Refer to Table 4.19.
Word 5 Bits 00–14
(00–16)
Real Time Sample Interval – Programs the interval of the real time sample. Can be
varied from 0 to 30 seconds (30000 decimal). Resolution is in ms with granularity in 5ms
steps. (see
page 4-55)
Table 4.20
Word/Bit Descriptions for the 1794-IF2XOF2I Analog Combo
Module Write
Write Word Decimal Bit
(Octal Bit)
Definition
To Next Page
Loading...
