Allen-Bradley 1794-IF4I User Manual

Publication 1794-6.5.8 - January 2010
Communication and I/O Image Table Mapping with the DeviceNet/ControlNet Adapter 81
Table 5.4
Setting the Input Filter
Bits Channel
03 02 01 00 Input 0
07 06 05 04 Input 1
11 10 09 08 Input 2
15 14 13 12 Input 3
A/D Conversion
Rate
Low Pass Filter
00001200Hz No low pass
00011200Hz 100ms low pass
00101200Hz 500ms low pass
00111200Hz 1000ms low pass
0100600Hz No low pass
0101600Hz 100ms low pass
0110600Hz 500ms low pass
0111600Hz 1000ms low pass
1000300Hz No low pass
1001300Hz 100ms low pass
1010300Hz 500ms low pass
1011300Hz 1000ms low pass
1100150Hz No low pass
1101150Hz 100ms low pass
1110150Hz 500ms low pass
1111150Hz 1000ms low pass
Table 5.5
Configuring Your Input Module
Input Channel Configuration
03 02 01 00 Set these bits for Channel 0
07 06 05 04 Set these bits for Channel 1
11 10 09 08 Set these bits for Channel 2
15 14 13 12 Set these bits for Channel 3
Bit Settings Input
Values
Data Format % Underrange
%Overrange
Input Range
(2)
Module Update Rate
Hexadecimal Decimal (RTSI = 0) (RTSI = 0)
IT = 1
0000Channel not configured

Allen-Bradley 1794-IF4I Specifications

General

Brand	Allen-Bradley
Model	1794-IF4I
Category	I/O Systems
Language	English