Allen-Bradley ControlLogix 1756 - Page 103

Publication 1756-RM084F-EN-P - July 2002
Entering Sequential Function Chart Logic 7-5
exports to this:
SFC_ROUTINE Sample_SFC_Routine1 (SheetSize := "Letter (8.5x11in)",
SheetOrientation := Landscape, StepName := "Step",
TransitionName := "Tran", ActionName := "Action",
StopName := "Stop")
TRANSITION (ID := 0, X := 120, Y := 1000, Operand := C_Array_Tran[31],
HideDescription := Yes, DescriptionX := 155, DescriptionY := 985,
DescriptionWidth := 0)
CONDITION (LanguageType := STX)
’TempTag > 0
END_CONDITION
END_TRANSITION
BRANCH (ID := 2, Y := 820, BranchType := Simultaneous, BranchFlow := Diverge)
LEG (ID := 3)
END_LEG
LEG (ID := 4)
END_LEG
LEG (ID := 5)
END_LEG
END_BRANCH
TRANSITION (ID := 6, X := 420, Y := 760, Operand := Aliased_Tran,
HideDescription := No, DescriptionX := 520, DescriptionY := 740,
DescriptionWidth := 0)
CONDITION (LanguageType := STX)
’TempTag > 0
END_CONDITION
END_TRANSITION
STOP (ID := 8, X := 460, Y := 880, Operand := ConsumedTag_Stop,
HideDescription := Yes, DescriptionX := 565, DescriptionY := 865,
DescriptionWidth := 0)
END_STOP
TRANSITION (ID := 10, X := 520, Y := 1360, Operand := Tran_UsedTwice,
HideDescription := Yes, DescriptionX := 555, DescriptionY := 1345,
DescriptionWidth := 0)
CONDITION (LanguageType := STX)
’TempTag > 0
END_CONDITION
END_TRANSITION
TRANSITION (ID := 12, X := 460, Y := 1160, Operand := Tran_UsedTwice,
HideDescription := Yes, DescriptionX := 495, DescriptionY := 1145,
DescriptionWidth := 0)
CONDITION (LanguageType := STX)
’TempTag > 0
END_CONDITION
END_TRANSITION
Spare Allen-Bradley Parts