Allen-Bradley ControlLogix 1756 - Page 104

Publication 1756-RM084F-EN-P - July 2002
7-6 Entering Sequential Function Chart Logic
BRANCH (ID := 14, Y := 940, BranchType := Selection, BranchFlow := Diverge,
Priority := UserDefined)
LEG (ID := 15)
END_LEG
LEG (ID := 16)
END_LEG
END_BRANCH
BRANCH (ID := 17, Y := 1320, BranchType := Simultaneous, BranchFlow := Converge)
LEG (ID := 18)
END_LEG
LEG (ID := 19)
END_LEG
END_BRANCH
STOP (ID := 20, X := 520, Y := 1440, Operand := Aliased_Stop, HideDescription := No,
DescriptionX := 400, DescriptionY := 1480, DescriptionWidth := 0)
END_STOP
STEP (ID := 22, X := 420, Y := 360, Operand := First_Step, HideDescription := Yes,
DescriptionX := 478, DescriptionY := 345, DescriptionWidth := 0,
InitialStep := Yes, PresetUsesExpression := No, LimitHighUsesExpression := No,
LimitLowUsesExpression := No, ShowActions := Yes)
ACTION (ID := 24, Operand := First_Action, Qualifier := L, IsBoolean := No,
PresetUsesExpression := No, IndicatorTag := Watch_Tag[3].PRE)
BODY (LanguageType := STX)
’
END_BODY
END_ACTION
ACTION (ID := 25, Operand := C_Array_Action[3], Qualifier := SL,
IsBoolean := No, PresetUsesExpression := No,
IndicatorTag := C_Produced_IndicatorArray[1])
BODY (LanguageType := STX)
’
END_BODY
END_ACTION
ACTION (ID := 26, Operand := UDT_Elem.Action_Member, Qualifier := D,
IsBoolean := No, PresetUsesExpression := No, IndicatorTag := "")
BODY (LanguageType := STX)
’
END_BODY
END_ACTION
ACTION (ID := 27, Operand := Action_000, Qualifier := R, IsBoolean := No,
PresetUsesExpression := No, IndicatorTag := "")
BODY (LanguageType := STX)
’
END_BODY
END_ACTION