Allen-Bradley ControlLogix 1756 - Page 105

Publication 1756-RM084F-EN-P - July 2002
Entering Sequential Function Chart Logic 7-7
ACTION (ID := 28, Operand := Action_001, Qualifier := N, IsBoolean := No,
PresetUsesExpression := No, IndicatorTag := Aliased_Indicator)
BODY (LanguageType := STX)
’
END_BODY
END_ACTION
ACTION (ID := 29, Operand := Action_002, Qualifier := DS, IsBoolean := Yes,
PresetUsesExpression := No, IndicatorTag := "")
END_ACTION
ACTION (ID := 30, Operand := ConsumedTag_Action, Qualifier := P0,
IsBoolean := No, PresetUsesExpression := No,
IndicatorTag := ConsumedTag_Indicator)
BODY (LanguageType := STX)
’
END_BODY
END_ACTION
END_STEP
STEP (ID := 31, X := 120, Y := 880, Operand := "C_Array_Step[0,1,2]",
HideDescription := Yes, DescriptionX := 179, DescriptionY := 865,
DescriptionWidth := 0, InitialStep := No, PresetUsesExpression := No,
LimitHighUsesExpression := No, LimitLowUsesExpression := No, ShowActions := Yes)
END_STEP
TRANSITION (ID := 33, X := 460, Y := 1000, Operand := NoTag_Tran,
HideDescription := Yes, DescriptionX := 495, DescriptionY := 985,
DescriptionWidth := 0)
CONDITION (LanguageType := STX)
’TempTag > 0
END_CONDITION
END_TRANSITION
STEP (ID := 35, X := 120, Y := 1080, Operand := UDT_Elem.Step_Member,
HideDescription := Yes, DescriptionX := 199, DescriptionY := 1065,
DescriptionWidth := 0, InitialStep := No, PresetUsesExpression := No,
LimitHighUsesExpression := No, LimitLowUsesExpression := No, ShowActions := Yes)
END_STEP
STEP (ID := 37, X := 720, Y := 880, Operand := Step_001, HideDescription := No,
DescriptionX := 760, DescriptionY := 940, DescriptionWidth := 0,
InitialStep := No, PresetUsesExpression := No, LimitHighUsesExpression := No,
LimitLowUsesExpression := No, ShowActions := Yes)
END_STEP
BRANCH (ID := 39, Y := 1220, BranchType := Selection, BranchFlow := Converge)
LEG (ID := 40)
END_LEG
LEG (ID := 41)
END_LEG
END_BRANCH
Spare Allen-Bradley Parts