Allen-Bradley ControlLogix 1756 - Page 85

Publication 1756-RM084F-EN-P - July 2002
Entering Function Block Diagram Logic 5-15
NEG
Operand := NEG_01,
VisiblePins := “
Source, Dest” )
NEQ
Operand := NEQ_01,
VisiblePins := “
SourceA, SourceB” )
NOT
Operand := NOT_01,
VisiblePins := “
Source, Dest” )
NTCH
Operand := NTCH_01,
VisiblePins := “
In, Out ”)
OR
Operand := OR_01,
VisiblePins := “
SourceA, SourceB, Dest” )
OSFI
Operand := OSFI_01,
VisiblePins := “
InputBit, OutputBit” )
OSRI
Operand := OSRI_01,
VisiblePins := “
InputBit, OutputBit ”)
PI
Operand := PI_01,
VisiblePins := “
In, Out ”)
PIDE
Operand := PIDE_01,
VisiblePins := “
PV, SPProg, SPCascade, RatioProg, CVProg, FF, HandFB,
ProgProgReq, ProgOperReq, ProgCasRatReq, ProgAutoReq, ProgManuaReq,
ProgOverrideReq, ProgHandReq, CVEU, SP, PVHHAlarm, PVHAlarm, PVLAlarm,
PVLLAlarm, PVROCPosAlarm, PVROCNegAlarm, DevHHAlarm, DevHAlarm, DevLAlarm,
DevLLAlarm, ProgOper, CasRat, Auto, Manual, Override, Hand
”)
PMUL
Operand := PMUL_01,
VisiblePins := “
In, Multipler, Out ”)
POSP
Operand := POSP_01,
VisiblePins := “
SP, Position, OpenedFB, ClosedFB, OpenOut, CloseOut ”)
RAD
Operand := RAD_01,
VisiblePins := “
Source, Dest” )
RESD
Operand := RESD_01,
VisiblePins := “
Set, Reset, Out, OutNot ”)
RLIM
Operand := RLIM_01,
VisiblePins := “
In, ByPass, Out ”)
RMPS
Operand := RMPS_01,
VisiblePins := “
PV, CurrentSegProg, OutProg, SoakTimeProg, ProgProgReq,
ProgOperReq, ProgAutoReq, ProgManualReq, ProgHoldReq, Out, CurrentSeg,
SoakTimeLeft, GuarRampOn, GuarSoakOn, ProgOper, Auto, Manual, Hold
”,
RampValue :=
array_name ,
SoakValue :=
array_name ,
SoakTime :=
array_name )
RTOR
Operand := RTOR_01,
VisiblePins :=
TimerEnable, PRE, Reset, ACC, DN”)
Instruction: Default Operand and VisiblePins formats (components within the Block structure):
Spare Allen-Bradley Parts