Allen-Bradley ControlLogix 1756 - Page 86

Publication 1756-RM084F-EN-P - July 2002
5-16 Entering Function Block Diagram Logic
SCL
Operand := SCL_01,
VisiblePins := “
In, Out ”)
SCRV
Operand := SCRV_01,
VisiblePins := “
In, Out ”)
SEL
Operand := SEL_01,
VisiblePins := “
In1, In2, SelectorIn, Out ”)
SETD
Operand := SETD_01,
VisiblePins := “
Set, Reset, Out, OutNot ”)
SIN
Operand := SIN_01,
VisiblePins := SIN(
source,destination );
SNEG
Operand := SNEG_01,
VisiblePins := “
In, NegateEnable, Out ”)
SOC
Operand := SOC_01,
VisiblePins := “
In, Out ”)
SQR
Operand := SQR_01,
VisiblePins := “
Source, Dest” )
SRTP
Operand := SRTP_01,
VisiblePins := “
In, HeatOut, CoolOut, HeatTimePercent, CoolTimePercent ”)
SSUM
Operand := SSUM_01,
VisiblePins := “
In1, Select1, In2, Select2, In3, Select3, In4, Select4,
Out
”)
SUB
Operand := SUB_01,
VisiblePins := “
SourceA, SourceB, Dest” )
TAN
Operand := TAN_01,
VisiblePins := “
Source, Dest”)
TOD
Operand := TOD_01,
VisiblePins := “
Source, Dest”)
TOFR
Operand := TOFR_01,
VisiblePins := “
TimerEnable, PRE, Reset, ACC, DN ”)
TONR
Operand := TONR_01,
VisiblePins := “
TimerEnable, PRE, Reset, ACC, DN ”)
TOT
Operand := TOT_01,
VisiblePins := “
In, ProgProgReq, ProgOperReq, ProgStartReq, ProgStopReq,
ProgResetReq, Total, OldTotal, ProgOper, RunStop, ProgResetDone,
TargetFlag, TargetDev1Flag, TargetDev2Flag ”)
TRN
Operand := TRN_01,
VisiblePins := “
Source, Dest”)
Instruction: Default Operand and VisiblePins formats (components within the Block structure):