Rockwell Automation Publication 2094-UM002G-EN-P - August 2016 267
Appendix C
DC Common Bus Applications
This appendix provides information and an example for calculating additional
bus capacitance specific to the Kinetix 6200 and Kinetix 6500 modular drive
systems configured for DC common bus.
Calculating capacitance, as it applies to the Bulletin 2094 shunt module and
Kinetix 6000M IPIM module, is also included in this appendix.
Before You Begin
These procedures assume you have mounted and wired your Kinetix 6200 or
Kinetix 6500 DC common-bus system.
Before you set the Additional Bus Capacitance (Add Bus Cap) parameter in
the Logix Designer application, you need to calculate these values:
•Total bus capacitance
• Additional bus capacitance
Topic Page
Before You Begin 267
Calculate Total Bus Capacitance 268
Calculate Additional Bus Capacitance 269
Bulletin 2094 Drive Capacitance Values 269
Common Bus Capacitance Example 270
To Next Page
Loading...
Need help?
General
