Rockwell Automation Publication 2094-UM002G-EN-P - August 2016 291
Web Server Interface Appendix E
Drive Information
From the Drv. Info tab, you can monitor data that can assist with
troubleshooting drive faults.
Figure 127 - Diagnostics>Drv. Info Tab
Table 130 - Drive Information Features
Field Name Description
SERCOS
(2094-SE02F-M00-Sx)
EtherNet/IP
(2094-EN02D-M01-Sx)
-S0 -S1 -S0 -S1
Main Power Cycles Cumulative number of main power cycles XXXX
Control Power Cycles Cumulative number of control power cycles XXXX
Cumulative Time with Control Power AppliedCumulative time with control power applied XXXX
Elapsed Time since Last Control Power CycleTime since control power was last applied XXXX
Cumulative Time with Main Power AppliedCumulative time with main power applied XXXX
Elapsed Time since Last Main Power CycleTime since main power was last applied XXXX
Cumulative Time with Power Stage EnabledCumulative time with power stage enabled XXXX
Elapsed Time with Power Stage EnabledTime since power stage was last enabled XXXX
Cumulative Energy Usage Cumulative amount of energy consumed by the inverter XXXX
Motor Brake Relay Cycles Cumulative number of motor brake relay cycles XXXX
Control Module Date Code Manufacturing date code XXXX
Power Module Date Code Manufacturing date code XXXX
Safety Firmware Version Safety firmware revision XXXX
KCL Version KCL build XXXX
Processor Board Hardware Version PCBA part number and revision XXXX
I/O Board Hardware Version PCBA part number and revision XXXX
Power Module Part Number / Revision Final assembly part number and revision XXXX
Control Module Part Number / Revision Final assembly part number and revision XXXX
To Next Page
Loading...
Need help?
General
