Allen-Bradley PowerFlex 40P User Manual

C-8 RS485 (DSI) Protocol
Reading (03) and Writing (06) Drive Parameters
To access drive parameters, the Modbus register address equals the
parameter number. For example, a decimal “1” is used to address
Parameter d001 [Output Freq] and decimal “39” is used to address
Parameter P039
[Accel Time 1].
Additional Information
Refer to http://www.ab.com/drives/ for additional information.

Allen-Bradley PowerFlex 40P Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 40P
Category	Controller
Language	English