Publication 1747-UM011G-EN-P - June 2008
16 Quick Start for Experienced Users
Required Tools and
Equipment
Have the following tools and equipment ready:
• Medium blade screwdriver
• Programming equipment
• Compatible communication cable and/or interface (The table
below indicates with an X, which cables are compatible with the
SLC 5/01 through 5/05 processors.)
Procedures
Network Interface Processor
SLC 5/01 SLC 5/02 SLC 5/03 SLC 5/04 SLC 5/05
1747-UIC
X
(1)
(1)
Requires 1747-C13 cable.
X
(1)
X
(1)(4)
(4)
Requires 1747-CP3 cable.
X
(4)
X
(4)
1747-PIC X X X
1747-CP3 X X X
1784-PKTX(D)
X
(2)
(2)
Requires 1784-CP14 cable.
X
(2)
X
(2)
X
1784-PCMK
X
(3)
(3)
Requires 1784-PCM4 cable.
X
(3)
X
(3)
X
(5)
(5)
Requires 1784-PCM6 cable.
10/100Base-T Ethernet X
1. Check the contents of the shipping box. Reference
Unpack the shipping boxes making sure that the contents include:
• SLC 500 modular processor
– installation instructions (publication 1747-IN009)
• SLC 500 modular chassis (catalog numbers 1746-A4, 1746-A7, 1746-A10, or
1746-A13)
– installation instructions (publication 1746-IN016)
• SLC 500 modular power supplies (catalog numbers 1746-P1, 1746-P2,
1746-P3, 1746-P4, 1746-P5, 1746-P6, or 1746-P7)
– installation instructions (publication 1746-IN004)
If the contents are incomplete, call your local Rockwell Automation representative
for assistance.
To Next Page
Loading...
