EasyManua.ls Logo

Allen-Bradley SLC 500

Allen-Bradley SLC 500
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Publication 1747-UM011G-EN-P - June 2008
Specifications 177
Power Supply
Specifications
This section provides specifications for the SLC 500 power supplies.
1746-P1, 1746-P2, 1746-P3, and 1746-P4 Power Supplies
Certification (when
product is marked)
UL Listed Industrial Control Equipment for Class I, Division 2, Groups A, B, C, D Hazardous Locations
C-UL Listed Industrial Control Equipment for Class I, Division 2, Groups A, B, C, D Hazardous Locations
CE
(3)
European Union 89/336/EEC EMC Directive, compliant with:
EN 50082-2 Industrial Immunity
EN 50081-2 Industrial Emissions
or
EN 61000-6-2 Industrial Immunity
EN 61000-6-4 Industrial Emissions
European Union 73/23/EEC LVD Directive, compliant with safety related portions of:
EN61131-2 Programmable Controllers
C-Tick, Australian Radio Communications Act, compliant with:
AS/NZS 2064 Industrial Emissions
(1)
RTC should not be relied upon for time-based periodic control. Use STI subroutine for periodic control.
(2)
See Capacitor Memory Backup vs. Temperature Curve.
(3)
See the Product Certification link at http://ab.com for Declarations of Conformity, Certificates, and other certification details.
(4)
SLC 5/04 processors manufactured prior to April 2002 draw 200 mA at 24V dc. Check your label to verify your processor’s current draw.
Attribute (1747-) SLC 5/01 SLC 5/02 SLC 5/03 SLC 5/04 SLC 5/05
L511 L514
L524 L531
L532
L533 L541 L542 L543 L551 L552 L553
Attribute Value
1746-P1 1746-P2 1746-P3 1746-P4
Line voltage 85...132/170...265V ac, 47...63 Hz 19.2....28.8V dc 85...132/170...265V ac 47...63
Hz
Typical line power requirement 135VA 180VA 90VA 240VA
Inrush current, max 20 A 45 A
Internal current capacity 2 A at 5V dc
0.46 A at 24V dc
5 A at 5V dc
0.96 A at 24V dc
3.6 A at 5V dc
0.87 A at 24V dc
10.0 A at 5V dc
2.88 A at 24V dc
(10)
Fuse protection
(1)
1746-F1 or
equivalent
(5)
(6)
1746-F2 or
equivalent
(5)
(8)
1746-F3 or
equivalent
(5)
(9)
Fuse is soldered in place
24V dc user-power current capacity 200 mA not applicable
1 A
(1)
24V dc user-power voltage range 18...30V dc 20.4...27.6V dc
User-supplied overcurrent protection, max
(2)
15 A not applicable 15 A
Ambient temperature, operating 0 °C...60 °C (32 °F...140 °F)
Current capacity is derated 5% above 55 °C (131°F)
0 °C...60 °C (32 °F...140 °F) no
derating
Isolation
(3)
1800V ac RMS for 1 s 600v ac rms for
1 s
2600V dc for 1 s

Table of Contents

Other manuals for Allen-Bradley SLC 500

Related product manuals