GS910 Series Gigabit Ehternet Unmanaged Switch Installation and User’s Guide
36
Installing the Switch on a Table or Desktop
To install the switch on a table or desktop, perform the following
procedure:
1. Remove all the items from the packaging.
2. Store the packaging material in a safe place.
In the event a problem occurs and you need to return the unit, use as
much of the original shipping material as possible.
3. Place the switch on a flat and secure surface, leaving ample space
around the switch for ventilation.
4. Proceed to “Cabling the Switch” on page 48 for the cable installation.
To Next Page
Loading...
