Alma Opus - Page 43

A P P L I C A T O R – O p u s C o l i b r i
O p u s C o l i b r i - I n s t r u c t i o n s f o r U s e C - 2 | P a g e
Figure C-3 - Tip Labels
Table C-1 - Opus Colibri Applicator and Tips Specifications
Applicator tip
Colibri
RF Output Power [W]:
5-20
Operation Mode:
Stationary
Diameter [mm]:
0.7 and 1
Output Frequency [MHz]:
40.68 MHz ±10 kHz
Tip Usage
Disposable (Single Use)
Cooling:
No active cooling
Applicator Trigger and footswitch
Warning
If the system is in Ready mode, energy emission occurs when the applicator
trigger or footswitch is activated.
RF emission is controlled by the applicator trigger or footswitch:
Figure C-4 – Opus Colibri Applicator Trigger and footswitch
RF emission starts by pressing the trigger or footswitch only when the system is in Ready mode.