A P P L I C A T O R – O p u s P l a s m a
O p u s - I n s t r u c t i o n s f o r U s e D - 3 | P a g e
Applicator Trigger and footswitch
Warning
If the system is in Ready mode, energy emission occurs when the applicator
trigger or footswitch is activated.
RF emission is controlled by the applicator trigger or footswitch:
Figure D.2-4 – Applicator Trigger and footswitch
RF emission starts by pressing the trigger or footswitch only when the system is in Ready mode.
D.3 Applicator Screens
Turn key switch ON and press Start button on the following screen:
Figure D-6: Tip Selection Screen
Press the button according to tip connected to the applicator from the next screen:
To Next Page
Loading...