110 Neo User’s Guide
Defining settings
To define SmartApplet settings through AlphaSmart Manager:
1. In AlphaSmart Manager, click the Settings tab.
2. Select the SmartApplet in the Settings List.
3. Check the settings you want to change, specifying additional
information as appropriate.
Note: When you change settings, notice that AlphaSmart
Manager automatically checks the corresponding SmartApplet
checkbox on the left. If you uncheck this checkbox, changes you
make to those settings won’t be sent to your Neo.
4. Click the Send List tab and verify that the settings you want to
transfer appear in the Send List Display.
5. Click Send.
The Disable This SmartApplet setting
The setting that every SmartApplet has is the Disable setting, which
lets you turn off access to that SmartApplet. For example, you might
The SmartApplets that appear in the Settings List are those you chose to
install on the SmartApplets tab, plus the SmartApplets already present on
all connected devices
To Next Page
Loading...
