These acoustical problems are so severe that no correction system has
been able to overcome them. Until now, with the introduction
of
IMPRINT, Alpine provides a hardware/software combination that not
only solves these problems,
it
actually improves the sound stage, tonal
balance and definition - and does it automatically, in a matter
of
minutes!
IMPRINT using MultEQ is superior to other equalization systems in
five ways.
•
It
is
the only system that measures the entire listening area,
capturing time domain information from each listening
location and applying a proprietary method for processing
it
to represent all seat locations. This gives the people
in
each
seat the optimal listening experience.
•
It
corrects both time and frequency problems, for
an
improved soundstage and smoother, more natural sound.
• It uses dynamic frequency allocation to apply hundreds of
points of correction
to
those areas where the sound problems
are greatest.
•
It
determines optimized blending points for low frequency
crossovers.
•
It
provides,
in
minutes, vehicle sound tuning that generally
takes skilled professionals days to accomplish.
Navigation System
(Optional)
Switching
the
Navigation
Screen
(Optional)
If
an optional Alpine Navigation System
is
connected to the IVA-W505,
the Navigation screen can be displayed
on
this unit.
1 Touch
[SOURCE]
on the main source screen.
The source screen appears on the display.
2 Touch
[NAY.].
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner's Manual of the
navigator.
• The Navigation mode is selected in "Setting the VISUAL Soft
Button" (page
39). The navigation mode is activated through the
VISUAL Button without interrupting normal audio.
•
If
the Navigation mode menu
is
not displayed on the main menu
screen, select
ON
in "Setting the Navigation Mode" (page 38).
• When the Navigation System is
on
and
in
guidance mode, the voice
prompts
and
navigation map interrupts the current audio source.
•
For
operation,
if
a navigation system with touch panel operation is
connected. refer to the Owner's Manual
of
the navigation system.
Portable
Navigation
System
Operation
(Optional)
An optional Alpine Portable Navigation System
is
controllable from the
unit. For details on operation, refer to the Owner's Manual
of
the
Portable Navigation.
A
BOX
type navigation system and portable navigation cannot
be
connected
at
the same time.
About dockable BLACKBIRD series
or
Portable Navigation devices
with this unit.
• Docking to the PMD-B100 is not possible.
•
For
information on docking a portable navigation to the unit, consult
your Alpine dealer.
1 Press
OPEN
on the unit.
The unit changes to the EJECTfTlLT screen.
2 Touch
[OPEN].
The movable monitor will open.
57-EN
These acoustical problems are so severe that no correction system has
been able to overcome them. Until now, with the introduction
of
IMPRINT, Alpine provides a hardware/software combination that not
only solves these problems,
it
actually improves the sound stage, tonal
balance and definition - and does it automatically, in a matter
of
minutes!
IMPRINT using MultEQ is superior to other equalization systems in
five ways.
•
It
is
the only system that measures the entire listening area,
capturing time domain information from each listening
location and applying a proprietary method for processing
it
to represent all seat locations. This gives the people
in
each
seat the optimal listening experience.
•
It
corrects both time and frequency problems, for
an
improved soundstage and smoother, more natural sound.
• It uses dynamic frequency allocation to apply hundreds of
points of correction
to
those areas where the sound problems
are greatest.
•
It
determines optimized blending points for low frequency
crossovers.
•
It
provides,
in
minutes, vehicle sound tuning that generally
takes skilled professionals days to accomplish.
Navigation System
(Optional)
Switching
the
Navigation
Screen
(Optional)
If
an optional Alpine Navigation System
is
connected to the IVA-W505,
the Navigation screen can be displayed
on
this unit.
1 Touch
[SOURCE]
on the main source screen.
The source screen appears on the display.
2 Touch
[NAY.].
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner's Manual of the
navigator.
• The Navigation mode is selected in "Setting the VISUAL Soft
Button" (page
39). The navigation mode is activated through the
VISUAL Button without interrupting normal audio.
•
If
the Navigation mode menu
is
not displayed on the main menu
screen, select
ON
in "Setting the Navigation Mode" (page 38).
• When the Navigation System is
on
and
in
guidance mode, the voice
prompts
and
navigation map interrupts the current audio source.
•
For
operation,
if
a navigation system with touch panel operation is
connected. refer to the Owner's Manual
of
the navigation system.
Portable
Navigation
System
Operation
(Optional)
An optional Alpine Portable Navigation System
is
controllable from the
unit. For details on operation, refer to the Owner's Manual
of
the
Portable Navigation.
A
BOX
type navigation system and portable navigation cannot
be
connected
at
the same time.
About dockable BLACKBIRD series
or
Portable Navigation devices
with this unit.
• Docking to the PMD-B100 is not possible.
•
For
information on docking a portable navigation to the unit, consult
your Alpine dealer.
1 Press
OPEN
on the unit.
The unit changes to the EJECTfTlLT screen.
2 Touch
[OPEN].
The movable monitor will open.
57-EN
To Next Page
Loading...
