BYK-Gardner GmbH Introduction | 1
301 200 085 E 2309 wave-scan 3 / wave-scan 3 dual 11
1.6 Intended Use
The wave-scan 3 (7403) is designed to measure Orange Peel & Distinctness-of-Im-
age (DOI) on high-gloss surfaces. The wave-scan 3 dual (7400) includes an addi-
tional Infrared Super-Luminescent Diode (IR-SLED) to support an extended mea-
surement range; it can also measure on semi-gloss surfaces.
By placing the base plate of the unit onto the surface, pressing the Operate but-
ton on the front and moving the instrument over the surface, it measures the
properties of the surface and processes, stores and displays the measured data.
The instrument can be connected via USB or WiFi to a PC to read or write data.
The capacitive display allows an easy configuration and usage of the instrument.
To Next Page
Loading...
Need help?
General
