6 | Organizer Measurements BYK-Gardner GmbH
40 wave-scan 3 / wave-scan 3 dual 301 200 085 E 2309
6.3 Upload to Database
The saved results are transferred to the PC and displayed as a QC report. The data
is saved in a database for further analysis over time. Pre-prepared test reports in
the software “smart-chart” assist in analyzing the data.
Storage Structure
Each measurement series contains a header and the individual measurements with
their name (check zone) and the measured values.
In the header, up to 5 parameters can be defined for object identification, for ex-
ample:
• 1: Model
• 2: Color
• 3: Paint line
• 4: Comment
• 5: Vehicle-ID
Parameters #1 to #3 are defined in the organizer file, parameters #4 and #5 can
be entered before storage in the database. Additionally, date and time of the mea-
surements are stored.
This structure determines the data organization in the instrument and in the data-
base. In addition to the definition of parameters before the measurements using
organizers, the parameters and check zones can also be entered during the mea-
surements; see Standard Measurements [}29].
To Next Page
Loading...
