Altana BYK wave-scan 3 - Appendix; Application Hints

BYK-Gardner GmbH Appendix | 9
301 200 085 E 2309 wave-scan 3 / wave-scan 3 dual 59
9 Appendix
9.1 Application Hints
This section lists the common measurement tasks and the recommended proce-
dure.
Single Measurements
For occasional sample-measurements:
• Take readings, see chapter Quick Measurements [}25].
• Transfer results directly to “smart-chart”.
Regular Test series
Here test sequence / identification can be standardized, e.g. batch control:
• Take readings, see chapter Standard Measurements [}29].
• Transfer results directly to “smart-chart”.
Objects with several Test Zones
Here test sequence / identification can be standardized, e.g. automobile or add-on
parts:
• Create an organizer in “smart-chart”.
• Transfer organizer to the instrument.
• Take readings, see chapter Organizer Measurements [}37].
• Transfer results to “smart-chart” and store in database.
• Perform data analysis in “smart-chart”.
Occasional Test Series
Here test sequence / identification cannot be standardized, e.g. projects:
• Generate new measurement configuration.
• Take readings, see chapter Standard Measurements.
• Transfer results directly to “smart-chart”.