BYK-Gardner GmbH Getting Started | 3
301 200 085 E 2309 wave-scan 3 / wave-scan 3 dual 23
3.5 Inclination Sensor
The angle of holding the instrument is observed by the integrated sensor. Depend-
ing on the current angle the display is automatically flipped.
To flip the display back change the angle of holding until the sensor detects the
difference and flips the display again.
3.6 Starting Measurements
You can directly start taking measurements. The instrument is working with de-
fault parameters.
Select Configuration > Measurement Parameters [}47] to change these set-
tings.
To Next Page
Loading...
