Altana BYK wave-scan 3 User Manual

4 | Quick Measurements BYK-Gardner GmbH
28 wave-scan 3 / wave-scan 3 dual 301 200 085 E 2309
The LED light on the instrument turns to red and a warn signal is given out, see
Configuration [}45] > Sound. Check the message and repeat.
NOTICE
Different messages are possible; depending on the current state of instrument or
measurement > see System Messages [}62].
4.6 Final Menu
The context menu now contains additional entries:
• Delete last measurement: Enables you to repeat the last measurement.
• Delete sample: Enables you to repeat all measurements on the current sam-
ple.
• End test series: Enables you to repeat the complete test series.
• Interrupt statistics: Interrupts the measurements on the current sample be-
fore reaching the preset number of measurements. Details see Statistics
[}48].
• Save data: This option is reserved for a later release.
You can continue to measure further samples or stop the quick check via the Back
symbol.
NOTICE
In Quick check mode the measurements are not saved. If you go back to the
dashboard, your measurement data is dropped. Use Measure mode to store data.

Altana BYK wave-scan 3 Specifications

General

Brand	Altana
Model	BYK wave-scan 3
Category	Measuring Instruments
Language	English