BYK-Gardner GmbH Configuration | 8
301 200 085 E 2309 wave-scan 3 / wave-scan 3 dual 55
8.4 Display Time
You can configure the time interval for the automatic shutdown of your instru-
ment.
Following values are possible (in minutes): 1, 2, 5, 10, 15, 30.
8.5 Checking Tiles
To document the correct measurement status of your instrument, you can save the
checking tiles in the system memory. Select the option Add to standard list.
The option Add to standard list is active if the checking tile has not been added
yet. To delete these entries from memory use the function Browse Measurements
[}41] > Standards.
To Next Page
Loading...
