Altana BYK wave-scan 3 User Manual

BYK-Gardner GmbH Getting Started | 3
301 200 085 E 2309 wave-scan 3 / wave-scan 3 dual 21
3.2.3 Battery Warning
When the battery voltage falls below the required operating voltage in the course
of operation, the following message appears on the display.
To ensure that the instrument is always ready for operation, it is recommended to
have the second battery pack handy, especially when performing measurements in
the field.
3.2.4 Switching On
The instrument is turned on via the Operate button on the left side. After turning
on the instrument the display on the top shows the main menu.
The instrument is operated completely via the display and the Operate button.
The instrument turns off automatically, if not used; see Configuration > Display
Time [}55]. For manual turn off select Configuration > Shutdown [}58].
3.3 Attaching the Hand Strap
The instruments provides a mounting option for the safety wrist strap.
Use the hand strap as protection against dropping the instrument.

Altana BYK wave-scan 3 Specifications

General

Brand	Altana
Model	BYK wave-scan 3
Category	Measuring Instruments
Language	English