Altana BYK wave-scan 3 User Manual

5 | Standard Measurements BYK-Gardner GmbH
36 wave-scan 3 / wave-scan 3 dual 301 200 085 E 2309
5.5.4 Next Measurement
When all measurements according to the current statistics settings are done, the
next measurement will be automatically assigned to the next sample.
Proceed with the following steps:
• Perform the next measurement until the current sample is completed.
• Measure the next sample until the current test series is completed.
• Repeat this procedure for all other test series until the current standard is com-
pleted.
You can now proceed with the next standard to be measured.
5.6 Aborting
You can abort the measurement procedure at any time via the menu option End
test series and return later to continue.
NOTICE
The modus Measure always shows the next measurement to be done. If you want
to view or manage results, please use the Browse function in the main menu.

Altana BYK wave-scan 3 Specifications

General

Brand	Altana
Model	BYK wave-scan 3
Category	Measuring Instruments
Language	English