BYK-Gardner GmbH Getting Started | 3
301 200 085 E 2309 wave-scan 3 / wave-scan 3 dual 19
3.2 Powering the Instrument
The measurement unit can be operated with the rechargeable battery pack in-
cluded in the delivery. Depending on the specific brand, the capacity of the battery
pack is sufficient for up to 1,000 measurements.
3.2.1 Rechargeable Battery Pack
To place the instrument in service, the rechargeable battery pack must be inserted
until it locks in place. The second battery pack is inserted in the docking station.
The battery pack can only be attached when it is in the correct position.
WARNING: Removal of rechargeable battery pack
Do not remove the rechargeable battery pack while the instrument is switched on.
Always perform regular shutdown before opening the instrument’s housing.
When inserting the rechargeable battery pack, ensure that its contacts are aligned
with those of the instrument.
NOTICE: Using rechargeable battery packs
To ensure uniform utilization, the rechargeable battery packs should be exchanged
regularly between instrument and docking station. The recommendation is a
weekly exchange.
The rechargeable battery pack should be fully charged in regular intervals to main-
tain its full capacity. The recommendation is at least once every 6 months.
To Next Page
Loading...
Need help?
General
