Amada Vipros 357 Queen User Manual

Vipros 357 Queen with Fanuc 18PC User Pre-installation Guide ©Amada America, Inc.
Print Date 01/24/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 1 of 37
Vipros 357 Queen with Fanuc 18PC
User Pre-installation Guide
Amada America Inc.
7025 Firestone Blvd.
Buena Park CA. 90621
Phone: (714) 739 2111
Fax.: (714) 739 4099
Email info@amada.com

Amada Vipros 357 Queen Specifications

General

Type	Turret Punch Press
Tonnage	30 tons
Turret Capacity	58 stations
Maximum Material Thickness	0.250 inches (mild steel)
Control	Fanuc 18P

Summary

Specifications - Motion Package

Specifications - Punching System

Turret Configuration - 58 Station - 2 Auto-Index

Fanuc 18PC Controller Specifications

Hydraulic Systems Specifications

Electrical Supply Requirements

Vipros 357 Queen Electrical Requirements

Electrical needs for the Vipros 357 Queen, including voltage, amps, and kVA.

SBC EX 5.5 Chiller Electrical Requirements

Electrical needs for the SBC EX 5.5 Chiller, including voltage, amps, and kVA.

Installing the Electrical Power Supply

Pneumatic Supply Requirements

Vipros 357 Queen Pneumatic Requirements

Pneumatic needs for the Vipros 357 Queen, including pressure and volume.

Installing the Pneumatic Supply

Planning the Location of the Vipros 357 Queen

SBC EX 5.5 Chiller

SBC EX 5.5Chiller Placement

Chiller Connections

Foundation Requirements

Foundation Anchoring Procedure

Foundation J-bolt Mounting Detail

Machine Anchoring Requirements

Floor J-bolt Hole Detail (Saw Cut)

Alt. Floor J-bolt Hole Detail (Core Drill)

Foundation / Floor J-bolt Mounting Procedure

Alt. Anchoring Method (Anchor Rod/Adhesive)

Drilled Hole with Anchor Rod and Adhesive Mounting Procedure

Removing the Protective Coating

Machine Leveling Procedure

Machine Rocking Test

Leveling Procedure