Amazone AmaLog+ - Fault display A5

Faults
AMALOG BAH0017.6 08.19
35
8.3 Fault display A5
Alarm message
 in the event of insufficient seed quantity
 for machines with fill level sensor
 in the event of a malfunction of the seed
seeding shaft
 only on
DMC Primera, Condor and Citan 01
 only on machines
with combined seed level and seeding
shaft monitoring
In the event of an alarm
 the display (Fig. 30) appears
 an acoustic signal (triple signal tone) is
emitted.
Fig. 30
The display switches in the event of insufficient
seed quantity.
The control symbol (Fig. 31/1) marks the fill level
symbol.
The alarm is repeated when the machine is used
again, e.g. after turning at the end of the field.
Fig. 31