Amazone AmaLog+ - Fault display A6 (DMC Primera, Condor and Citan 01 only)

Faults
36
AMALOG BAH0017.6 08.19
8.4 Fault display A6 (DMC Primera, Condor and Citan 01 only)
Alarm message
 in the event of insufficient fertiliser
 in the event of a malfunction of the ferti-
liser seeding shaft
In the event of an alarm
 the display (Fig. 32) appears
 an acoustic signal
(triple signal tone) is emitted.
Fig. 32
The display switches in the event of insufficient
fertiliser.
The control symbol (Fig. 33/1) marks the fill level
symbol.
The alarm is repeated when the machine is used
again, e.g. after turning at the end of the field.
Fig. 33
Switching off the alarm message
1. Press and hold button (blue)
2. Press
.
 The warning message is switched off.
The alarm message can only be switched off after the alarm has been
triggered.
Alarm deactivation only applies until the control terminal is switched
off.