Tables
38
AMALOG BAH0017.6 08.19
Mode 3 Code Implement type
0 Cam wheel seed drills
D9 Super/Special
D9 6000 TC
AD
Cataya Special
3
Cam wheel seed drills
with seed shaft monitoring
D9 Super/Special
D9 6000 TC
AD
Cataya Special
1 Pneumatic seed drills
AD-P
Citan 6000
2
Pneumatic seed drills
With 2 separate hoppers and
with seed shaft monitoring
Citan 01
Condor
DMC Primera
4
Pneumatic seed drills
With seed shaft monitoring
AD-P
DMC Primera
Mode 4
Code
The period between occurrence of the error in tramline control and trig-
gering of the alarm
00
Alarm is switched off
10
Setting for pneumatic seed drills (10 seconds)
22
Setting for cam wheel seed drills (22 seconds)
Mode 5 Code The period in which no alarm must be triggered
for cam wheel seed drills
between the command to create tramlines and standstill of the lay shaft
for pneumatic seed drills
between the command to create tramlines and closing of the outlets in
the distributor head.
00
Do not make this setting (0 seconds)
10
Setting for pneumatic seed drills (10 seconds)
22
Setting for cam wheel seed drills (22 seconds)
Mode 6 Code Rotary cultivator monitoring
0
Setting without rotary cultivator monitoring
1
Setting with rotary cultivator monitoring
To Next Page
Loading...
