Commissioning
Amatron+ BAG0063.1 03.10 23
The pulse/100 m value can be stored
for 3 tractors:
1.
, Select tractor
2.
Enter/change name
3.
Enter pulse/100 m for selected trac-
tor
If a tractor has already been stored
here, its pulse/100 m and power take-
off speed values will be used.
Fig. 24
5.3.3 Entering power take-off speed (machine data )
Only for tractors with power take-off speed recording.
Enter specified power take-off speed
540 rpm, 720 rpm
Standard speed
0 rpm:
no power take-off sensor fitted / moni-
toring not wanted.
Enter pulse per power take-off revo-
lution (ask dealer).
Select memory for 3 tractors with
associated power take-off speed.
1.
, Select tractor
2.
Enter/change name
3.
Enter power take-off speed.
Fig. 25
To Next Page
