Amazone AMATRON+ ZA-M - Boundary Spreading (ZA-M Hydro Only)

Use on the field
50 Amatron+ BAG0063.1 03.10
6.2.9 Boundary spreading (ZA-M Hydro only)
,
Switch on/off trench spreading left/right.
,
Switch on/off boundary spreading left/right.
,
Switch on/off side spreading left/right.
Boundary spreading can also be carried out on both sides.
 Switch on boundary spreading left and right.
,
Reduce/increase spreader disc speed for selected type of spreading.
 The boundary spreading speed is increased or reduced by 10
rpm each time the key is pressed.
 The changed speed is stored for later boundary spreading.
 Boundary spreading can be selected once
the discs have stopped.
 If the discs are turning, their speed is re-
duced to the boundary setting.
 The boundary spreading speed is stored in
the Machine data menu for the particular
boundary spreading type.
 A reduced quantity is entered in the Ma-
chine data menu for boundary and trench
spreading.
Fig. 65/…
(1) Display Boundary sp
reading on.
(2) Display Reduced spreader disc speed
Fig. 65
Boundary spreading can be selected when the discs are closed.