Amazone AMATRON+ ZA-M - 6 Use on the Field

Use on the field
Amatron+ BAG0063.1 03.10 43
6 Use on the field
CAUTION
During travel to the field and on public roads, the AMATRON
+
should always be switched off!
 Incorrect use leads to the risk of accidents!
ZA-M Profis:
 Carry out an automatic fertiliser calibration when you start
spreading.
 Tare the spreader before you use the AMATRON
+
for the
first time and after fitting any special equipment (see page 39).
Before the spreader can be used, the following information must be
entered:
 Enter machine data (see page 19).
 Load and star
t job (see page 25).
 Calibrate fertiliser
with unit at rest or enter calibration value
manually (see page 27).
The quantity spread can be changed during spreading by pressing the key.
Each press of the key increases the
spread amount by the rate increase
(page 19) (e.g. +10%).
Set spread amount to 100% on both
sides.
Each press of the key increases the
spread amount by the rate increase
(19) (e.g. -10%).
Fig. 58
The changed amount is indicated in the work menu in kg/ha and per-
cent (Fig. 58)!