24 | IPS-4 Zone1/Analyzer
NOTE
Figure 4 is an example of an analyzer layout. Mounting configuration
and layout for your analyzer system may vary. Refer to the customer-
specific drawings in the “Supplemental Information” tab of this
manual or the Documentation Package shipped with the analyzer.
Figure 4a.
Analyzer mounting
details, example only.
SEE DETAIL "A"
A
C
L
DETAIL "A"
9.81
[249.08]
3.36
[85.40]
2.76
[70.0]
2.76
[70.0]
6.18
[157.0]
SAMPLE RETURN
1/4 TB FTG
SAMPLE IN
1/4 TB FTG
CAL GAS IN
1/4 TB FTG
6 M32 WIRING PORTS,
(SEE DETA IL "A")
4 PLUGS AND 2 M32-3/4NPT(F)
ADAPTORS SUPPLIED.
WIRING CONFIGURAT ION IS AT
CUSTOMER'S DISCRETION.
INSTRUMENT AIR
OR
NITROGEN
1/4" TB FTG.
7.00
[177.8]
20.15
[511.68]
16.15
[410.08]
12.15
[308.48]
INSTRUMENT AIR
OR
NITROGEN
1/4" TB FTG.
[285.75]
42.25
[1073.2]
44.00
[1117.9]
NOTES:
1. THE DRAWING REPRESENTS A
CONCEPTUAL VIEW OF THE ZONE 1 IPS-4.
ACTUAL LAYOUT AND INCLUDED COMPONENTS
WILL VARY BASED ON CUSTOMER REQUIREMENTS
AT TIME OF ORDER.
2. DIMENSIONS ARE IN INCHES, [mm]
27.125
[689.0]
0
To Next Page
Loading...
Need help?
General
