Table 1-1
2 kW to 3 kW Series Technical Characteristics
PARAMETERS
SPECIFICATIONS
PHYSICAL CHARACTERISTICS
Width
Depth
Height
Weight
ELECTRICAL CHARACTERISTICS
Input Power (Standard)
Voltage
Frequency
Phases
Regulation (Line or Load)
Voltage
Current
Transient Response
Stability
Remote Control/Monitor
Power Density
Power Factor
Efficiency
19.00 in.
18.00 in (output connections not included)
3.50 in.
45 lbs. max.
208-230 VAC
(tested to 190-253 VAC)
47 to 63 Hz
Single, 2-wire plus ground
Three, 3-wire plus ground (optional)
0.1% of max. output voltage
0.2% of max. output current
A 30% step load will recover to within 2% of
original value within 10ms.
+0.05% of set point after 8 hr. warm-up
at fixed line, load and temp.
Output On/Off control via contact closure,
6-120 VDC or 12-120 VAC, and TTL or CMOS
switch, output voltage and current monitor,
OVP limit set, and summary fault status
2.5 Watts/cubic in.
.72 min.
80% minimum at full load
M550004-01
1-2
To Next Page
Loading...
