Ametek Thermox WDG-VCM User Manual

A-34 | Thermox WDG-V Series Analyzers
If you have the Methane option, you will be prompted to enter this gas
as well if you are calibrating them at this time.
When all gases have calibrated, the screen displays the Calibration Results
that include % drift as well as recovery time. If the calibration is success-
ful, a large green checkmark will be displayed. If it is not, a large red X is
displayed.
Figure38.Calibration_CalibrationResultsscreen.

Ametek Thermox WDG-VCM Specifications

General

Brand	Ametek
Model	Thermox WDG-VCM
Category	Measuring Instruments
Language	English