Ammann ARX 23-2C - Hydraulic Oil; Lubricating Grease; Emulsion

114 ARX 23-2 T4i, ARX 26-2 T4i
0787
AMN242
E
2158
3.2 Specification of operating fluids
3.2.5 Lubricating grease
To lubricate the machine you must use plastic grease containing
lithium according to:
ISO 6743/9 CCEB 2
DIN 51 502 KP2K-30
3.2.6 Emulsion
For sprinkling the tyres, use anti-adhesive emulsion of RHO-
DOSIL EMULSION E1P with water in the mixing ratio of 1.5:100.
3.2.4 Hydraulic oil
For the hydraulic system of the machine, it is necessary to use
only high-quality hydraulic oil grades according to ISO 6743/HV
(equal to DIN 51524 part 3 HVLP).
Fill the machines with hydraulic oil that has cinematic viscosity
of 46mm
2
/s at 40°C (104°F) ISO VG 46. This oil is the most ap-
propriate to be used within the widest range of ambient tem-
peratures.
Synthetic hydraulic oil
The hydraulic system can be lled with synthetic oil, which if
leaks occur will be degraded completely by micro-organisms
present in water and soil.
Please consult always with oil manufacturer or dealer
any switching from mineral oil to synthetic one or mix-
ing the oils of various brands!