Ammann ARX 23-2C - Lubrication and Maintenance Chart

116 ARX 23-2 T4i, ARX 26-2 T4i
3.4 Lubrication and maintenance chart
Every 20 hours of operation (daily)
3.6.1 Fuel check
3.6.2 Engine oil check
3.6.3 Engine coolant check
3.6.4 Checking the oil in the hydraulic tank
3.6.5 Hydraulic oil cooler cleaning
3.6.6. Air lter check
3.6.7 Sprinkling emulsion level check
3.6.8 Sprinkling tank relling
3.6.9 Scraper adjustment
3.6.10 Inspection of warning and checking devices
3.6.11 Engine leakage check
3.6.12 Check of the fan and engine belt for condition
3.6.13 Brake test
3.6.14 Check of the tightness of the fuel andhydraulic system
Every 50 hours of operation
3.6.15 Check of hoses and clips
3.6.16 Battery inspection
After 50 hours of operation
3.6.22 Engine oil change *
Every 100 hours of operation
3.6.17 Air lter cleaning
3.6.18 Cleaning the water separator on the fuel lter
3.6.19 Machine lubrication
3.6.20 Tyre pressure check
Every 250 hours of operation
3.6.21 Fuel lter replacement
3.6.22 Engine oil change *
3.6.23 Checking the hoses of the engine cooler for wear and mounting
3.6.24 Checking the hoses and clips for mounting
3.6.25 Sprinkling lter cleaning
3.6.26 Engine intake pipe inspection