117ARX 23-2 T4i, ARX 26-2 T4i
MAINTENANCE MANUAL
Every 500 hours of operation, but at least once a year
3.6.27 Fuel tank cleaning
3.6.28 Electrical installation inspection
3.6.29 Replacement of the fuel separator lter cartridge
3.6.30 Valve clearance check and adjustment
3.6.31 Engine cooler cleaning
3.6.32 Check of rubber-metal elements of the engine cooler
After 500 hours of operation
3.6.33 Hydraulic oil change and lter replacement **
Every 1000 hours of operation
3.6.33 Hydraulic oil change and lter replacement **
3.6.34 Replacement of air lter cartridges
3.6.35 Damping system check
3.6.36 Swinging support check
3.6.37 Articulation joint check
Every 2000 hours of operation
3.6.38 Engine belt replacement
3.6.39 Engine coolant change
3.6.40 Replacement of hoses of the cooling system
3.6.41 Replacement of rubber-metal elements of the engine cooler
3.6.42 Replacement of hoses of the fuel system
3.6.43 Replacement of suction hoses
Maintenance as required
3.6.44 Gas strut replacement
3.6.45 Cleaning the water separator
3.6.46 Cleaning the water tank
3.6.47 Cleaning the machine
3.6.48 Draining water from the sprinkling circuit before the winter season
3.6.49 Fuel system venting
3.6.50 Charging of the battery
3.6.51 Checking the screw connections for tightening
* First after 50 engine hours.
** First after 500 engine hours.
To Next Page
Loading...
