129ARX 23-2 T4i, ARX 26-2 T4i
h
1/4
2/4
1
3/4
9V
11V
15V
13V
0
0
0
1
MAN
AUT
6
11
11
h
1/4
2/4
1
3/4
9V
11V
15V
13V
29
26
h
1/4
2/4
1
3/4
9V
11V
15V
13V
22
23
MAINTENANCE MANUAL
Move o the machine:
After the travel control (11) is moved through the neutral posi-
tion “N”, the brake indicator lamp (29) goes out.
Emergency brake button function:
Let the machine stay on the spot and set the travel control to the
neutral position (N).
Press the emergency brake button (6).
The brake is enabled and the engine stalls.
The emergency stop indicator lamp (26) and the parking brake
indicator lamp (29) light up.
Turn the emergency brake button (6) in the direction of arrows.
Set the travel control (11) to the zero position (0) and the engine
speed control (3) to the idle speed position.
Now you can start the engine again.
Use the audible alarm to announce the engine start!
Before starting the engine, check that nobody is endan-
gered by the engine start!
Use the warning horn to signal the engine starting and
check that nobody is endangered by starting the engine!
Make sure that the area in front of and behind the ma-
chine is free and no persons are present there!
During operation, check the instruments and indicator
lamps continuously.
Promptly repair any failures!
Start the engine according to Chapter 2.7.1.
After the start, the indicator lamps for battery charging (22) and
engine lubrication (23) must go o.
To Next Page
Loading...
