152 ARX 23-2 T4i, ARX 26-2 T4i
1
3.6 Lubrication and maintenance operations
Hydraulic circuit lling
Take out the ventilation lter.
Fill the hydraulic oil through the hole into the tank.
Replace the ventilation lter with anew one.
Lubricate the seal ring of the new lter cap with oil.
Mount anew lter (1).
Carry out the oil change when the oil is warm, preferably
after operation of the machine.
Let the drained oil cool down below 50°C (122 °F).
Rell the same type of oil.
Stop the oil soaking into the ground.
To Next Page
Loading...
